Filter
Top Products
10
Troubleshooting Guide
If you experience difficulties in the use of this music system, please check the followings or call at
1-800-777-5331 for Customer Service and Support.
Problem Cause Solution
Power does not come on
when the power switch is
pressed.
Unit is unplugged. Connect the unit to the AC
power supply.
No sound comes out of the
speakers.
The volume is turned down (to MIN).
The input selector does not match
the playback source.
Adjust the volume.
Re-select the desired input
source.
THE WHOLE UNIT
The sound is noisy. The unit is too close to a TV set or
another similar appliance.
Turn off the TV or other
appliance, and relocate the
unit.
The cassette deck door
cannot be closed.
The cassette tape is not inserted
properly.
Insert the cassette tape
correctly.
The tape does not move. The cassette tape is not inserted
properly.
The tape has reached the end.
Insert the cassette tape
correctly.
Flip the cassette.
No sound from tape. The tape heads are dirty. Clean the tape heads.
TAPE DECK
The sound is distorted or
faint.
The tape heads are dirty. Clean the tape heads.
Cannot listen to any station,
or signal appears weak.
The station is not tuned-in properly.
A TV set is being used nearby and is
interfering with the radio reception.
Properly tune-in the desired
station.
Turn-off the interfering TV set.
TUNER UNIT
The sound is distorted.
The antenna is not oriented properly. Re-orient the antenna until
reception improves.
CD stops immediately after
starting, or unit pauses or
stops during play.
The CD is inserted upside down.
The CD is dusty or dirty or there is
condensation on the CD.
Insert the CD with the printed
side right-side up.
Carefully clean and dry the CD.
No sound. The CD player is paused. Press the PLAY/PAUSE button.
CD PLAYER
Specific CD is noisy, or
playback stops or skips.
The CD is scratched, damaged or
warped.
The disc is very dirty.
The CD should be changed.
Carefully clean the CD.