Filter
Top Products
6
LISTENING TO TAPE
PLAYBACK :
SET THE FUNCTION SELECTOR (5) TO “TAPE”.
LOAD CASSETTE TAPE INTO THE UNIT (LOCATED ON SIDE OF
THE UNIT) PLAYBACK WILL AUTOMATICALLY BEGIN
ADJUST THE VOLUME CONTROL (8) TO OBTAIN THE DESIRED
SOUND LEVEL..
FAST FORWARD : PRESS BUTTON HALFWAY TO FAST FORWARD THE TAPE.
PRESS BUTTON LIGHTLY AND PLAYBACK WILL RESUME.
STOP AND EJECTION : PRESS BUTTON ALL THE WAY TO END PLAYBACK AND EJECT TAPE.
REMARK:
- MAKE SURE THE TAPE DIRECTION IS CORRECT WHEN INSERTING IT INTO THE CASSETTE DECK.
- IT IS RECOMMENDED TO REMOVE THE CASSETTE TAPE FROM THE SYSTEM EVERY TIME AFTER
FINISHED LISTENING. DO NOT LEAVE THE CASSETTE TAPE INSIDE THE SYSTEM WHEN NOT IN TAPE
PLAYBACK MODE.
LINE OUT OPERATION
FOR BETTER PLAYBACK SOUND, YOU CAN CONNECT THE SB6052 TO AN EXTERNAL AUDIO
AMPLIFIER VIA THE RCA LINE OUT JACKS LOCATED ON THE BACK PANEL. PLEASE PROCEED AS
FOLLOWING:
1. CONNECT THE “L” & “R” LINE OUT JACKS AND THE AUX IN OF YOUR AUDIO AMPLIFIER.
(CONNECTION CABLE IS NOT INCLUDED).
2. SELECT THE MUSIC SOURCE BY SETTING THE FUNCTION SELECTOR (5) TO “PHONO”,
“TAPE”, “AM”, “FM” OR “FM ST” AS DESIRED.
3. TURN ON THE EXTERNAL AMPLIFIER.
4. SOUND WILL THEN COME OUT FROM THE SYSTEM’S BUILT-IN SPEAKERS AND THE
EXTERNAL AMPLIFIER’S SPEAKERS SIMULTANEOUSLY.
5. SET THE VOLUME CONTROL (8) TO “MIN” AND ADJUST THE SOUND LEVEL USING THE
VOLUME CONTROL ON THE EXTERNAL AMPLIFIER AS DESIRED.
6. TURN THE SYSTEM AND THE EXTERNAL AMPLIFIER OFF WHEN YOU HAVE FINISHED
LISTENING.
7. UNPLUG THE CONNECTION CABLE.