Filter
Top Products
MCD5070
6
BASIC OPERATION
Power On/Off (POWER)
Press the “ ” button(1)to turn the unit ON or OFF.POWER
Volume Control
When the volume is adjusted, the volume level is shown on the display panel as a number
ranging from 00 (lowest) to 100 (highest).
Mute
Press the MUTE button (8) on the control panel to mute the audio output. “Mute” will appear on
the display. Press MUTE again to restore the audio output to the previous level.
Mode
Press the MODE button (5) on the control panel to select a different mode of operation, as
indicated on the display panel. Available modes include Radio, CD, and AUX In (optional
Auxiliary Input).
Auxiliary Input
1. Connect the external signal to the “Aux In” jack (20) located on the front of the control
panel.
2. Press the MODE button to select Aux In mode.
3. Press MODE again to cancel Aux In mode and return to previous mode.
• initial installation of the unit when all wiring is completed
• function buttons do not operate
• error symbol on the display
Audio Menu
Press the AUDIO button (4) on the control panel to access the Audio Menu. You can
navigate through the Audio Menu items by pressing the volume control button repeatedly.
Once the desired menu item appears on the display, adjust that option by turning the volume
control knob within 5 seconds. The unit will automatically exit the Audio Menu after five
seconds of inactivity. The following menu items can be adjusted.
Volume Level
Use the button to adjust the Volume level from “00” (lowest) to “100” (highest).
Bass Level
Use the button to adjust the Bass level range from “-10” to “+10”.
Treble Level
Use the button to adjust the Treble level range from “-10” to “+10”.
Balance
Use the button to adjust the Balance between the left and right speakers from “10L” (full left) to
“10R” (full right). “BAL L=R” represents an equal balance between the left and right speakers.
Fader
Use the button to adjust the Fader between the rear and front speakers from “10R” (full rear) to
“10F” (full front). “FAD
R=F” represents an equal balance between the rear and front speakers.
Reset System
Use a pencil or any non-metallic object to press and hold the
RESET(17)
button for five seconds to reset
Factory default settings. The
the main unit. The unit will return to the
reset button should be activated for the
Following reasons:
The unit is supports after IGN off memorize the operation set up, like last play radio station,
preset store stations,etc To resume the back up memory by pressing “MODE+M1” together
Reset Back Up Memory
1
4
6
5
2
3
8
10 169 11 12 13 14
21
15
20
19
18
R
E
W
P
O
AUX
SCN
RPT
SHF
AS/PS
EQ
SCAN
M
UT
E
VOLUME
VOLUME
MODE
B
A
ND
AUDIO
MCD5070
40W x 4
7
22
17
U
LO D
Press Up ( ) Button to increase volume, press Down ( ) button to decrease volume.
Volume( )fades to rear, Volume( )fades to front.