Jensen JRX235 Speaker User Manual


 
Basic Installation Steps
Step 1: Remove existing speaker.
Step 2: Position new speaker and align with existing mounting
holes.
Step 3: Attach the positive (+) and negative (-) speaker terminals
(see FIGURE 2). Be sure to observe proper polarity when
connecting the wires (the striped wire is the negative
lead).
Step 4: If not using factory grilles, attach grille.
Step 5: Mount speaker (using factory hardware when possible).
Step 6: Reconnect negative battery terminal.
INSTALLATION
FIGURE 2 - CONNECTING SPEAKER WIRES
FIGURE 3 - REAR DECK INSTALLATION
FIGURE 1 - DOOR PANEL INSTALLATION
Speaker
Door Panel
3
Grille