Jensen JHD1620 Radio User Manual


 
JHD1620
10
SATELLITE RADIO OPERATION
Switching to Sirius Satellite Radio
(Requires optional Sirius tuner)
Press the MODE button (4) to change the mode to Sirius radio mode.
Accessing your Sirius RADIO ID
To display your Sirius radio ID, use the TUNE/SEEK |<< button to tune to channel “000”. The
screen will display “Sirius ID” with the SID displayed in the middle of the LCD screen. The
Sirius radio ID is 12 characters long.
Selecting a Band
In Sirius mode, press the BAND/WB button (15) to access the Sirius user-preset channel
groups in the following order: SR1, SR2, SR3.
Category Tuning
1. Press the PTY/CAT/MENU button (2) to access Category mode.
2. While in category mode, press 5/CAT- OR 6/CAT+ buttons (9, 10) to choose a category.
3. Press the TUNE/SEEK |<< / >>| buttons (18, 19) to choose desired channels in that
category. (The current channel number within the chosen category will always be the
default first channel tuned.)
4. Press the PTY/CAT/MENU button to return to channel tuning mode.
Channel Up/Down Tuning
Press the TUNE/SEEK |<< / >>| buttons (18, 19) to search for a channel. Press and hold the
TUNE/SEEK buttons to fast search.
Direct Tuning Mode
1. Press and hold the INFO/ENTER button (16) to enter direct tuning mode.
2. Press TUNE/SEEK |<< / >>| buttons (18, 19) to change the first of three digits for the
desired channel in the direct entry screen.
3. Press the INFO/ENTER button to confirm the entered digit and move to the second digit
field.
4. Press TUNE/SEEK |<< / >>| buttons to select the second digit.
5. Press the INFO/ENTER button to confirm the entered digit and move to the third digit
field.
6. Press TUNE/SEEK |<< / >>| buttons to select the third digit.
7. Press the INFO/ENTER button to confirm the three digit channel and tune to the selected
channel.
Storing Preset Channels
The preset buttons (5-10) can be used to store 6 channels, allowing convenient access to your
favorite channels.
Programming Channels
1. Select the channel you want to store in memory.
2. Press and hold a preset button (5-10) until the corresponding preset button number
appears.
3. Repeat steps 1 and 2 to program additional channels.
Preset Recall
Press one of the six preset buttons (5-10) to directly select a preset channel stored in the
current band.
Preset Scan
Press AS/PS/FAV button (14) to scan stations stored in all three user-preset channel groups
(SR1, SR2 and SR3). The unit will pause for 10 seconds at each preset station. Press AS/PS
again to stop scanning when the desired station is reached.
Preset Tuning
In Preset Tuning Mode, you can use the TUNE/SEEK |<< / >>| buttons (18, 19) to access all
18 preset stations in sequential order. Access preset tuning mode through the system menu.
Set Preset-Only Tuning to “ON.”
Alternate Display Mode
Press the DISP/SCROLL button (12) to change the display information between single and
dual line text display. In dual line mode, both artist and title are available for viewing.
Press and hold the DISP/SCROLL button to scroll the Artist/Song Title information.
While in category tuning list mode, press the DISP/SCROLL button in sequence to change the
display information from Channel Name, Artist, and Song Title.