JBL AVR480 Speaker System User Manual


 
DVD PLAYER
VCR (Video 1) TV or Video Monitor
In/Rec
Out/Play
In
Out
L R Video
Video S-Video
L Audio R
Video S-Video
Coax Optical
Component Video
Y Pb Pr
Component Video
Y Pb Pr
Cable or Sat or HDTV Set-Top Box (Video 2)
Out
REGION SELECTOR
L R Video S-Video
VIDEO CONNECTIONS
Device Connection Options
: Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Video 3 inputs are on the front panel of the receiver.
Device Input Name Audio Input Connections Audio Output Connections Video Connections
CD Player CD CD, Optical Digital Not required Not required
DVD Player DVD Coaxial Digital Not required DVD Composite or S-Video
VCR Video 1 Video 1 L/R Inputs Video 1 L/R Outputs Video 1 Composite or S-Video Input and Output
Cable Box or Satellite Receiver Video 2 Video 2 L/R Inputs, Optical or Coaxial Digital Input* Not required Video 2 Composite Input
Audio Recorder Tape Tape L/R Inputs, Digital Coaxial Input** Tape L/R Outputs, Digital Coaxial Output** Not required
TV or Projector TV TV L/R Inputs Not required Monitor-Out Composite and/or S-Video
250 Crossways Park Drive,Woodbury, New York 11797 www.jbl.com © 2004 Harman International Industries, Incorporated Part No. 55929040
A Harman International Company
FIGURE 5 – VIDEO CONNECTIONS
Dashed lines (––––) indicate coax and optical digital audio connections. Choose either
type (but not both) for each digital audio source.
† Component (Y/Pb/Pr) video connections are preferred; if available, connect the component
video outputs on your source device directly to the component video inputs on your TV.
Dotted lines (
••••) indicate composite or S-Video connections for your DVD or VCR.
S-Video is the second preferred connection when available, but you may use either
composite or S-Video (but not both). If you have two source devices with S-Video, you may
connect one S-Video output directly to the TV. When both composite and S-Video sources
are connected to the AVR, you must also connect both outputs from the AVR to your TV.
*
Check with your cable service provider to determine whether digital audio is available for all channels. It may be necessary to make BOTH analog and digital connections if it is not.
**
Digital audio recorders only.
®
PRO SOUND
COMES HOME