JBL S4800 Speaker User Manual


 
17
S
4800 SPECIFICATIONS
POWER HANDLING: 300W (RMS)*
FREQUENCY RESPONSE: 55Hz – 40kHz (–6dB)
LOW-FREQUENCY EXTENSION: 28Hz (–10dB)
SENSITIVITY: 93dB (2.83V/1m)
NOMINAL IMPEDANCE: 8 Ohms
CROSSOVER FREQUENCIES: 900Hz, 8kHz
LOW-FREQUENCY DRIVER: 15" (380mm) Kevlar
®
-composite-
cone woofer (1500FE)
HIGH-FREQUENCY DRIVER: 3" (75mm) Aluminum compression
driver (435AL) in 1-1/2" (38mm)-
throat Bi-Radial
®
horn
ULTRAHIGH-FREQUENCY DRIVER: 1" (25mm) Pure-titanium compression
driver (045Ti) in 0.35" (8.9mm)-
throat Bi-Radial horn
DIMENSIONS (H X W X D): 42" (42-3/4" with spike feet) x 19-3/4" x 14-5/8"
1067mm (1086mm with spike feet) x 501mm x 376mm
WEIGHT: 143 lb (65kg) per speaker
* The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks.
We do not recommend sustained operation at these maximum power levels.
All features and specifications are subject to change without notice.
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Chateau du Loir
France
declare in own responsibility that the product described
in this owner’s manual is in compliance with technical
standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Laurent Rault
Harman Consumer Group International
Chateau du Loir
, France 10/05
S4800 OM 10/11/05 1:51 PM Page 17