Filter
Top Products
CONNECTION TIPS
SPEAKER CONNECTIONS
Speakers and electronics
terminals have corresponding (+)
and (–) terminals. It is important
to connect both speakers
identically: (+) on the speaker to
(+) on the amplifier and (–) on the
speaker to (–) on the amplifier.
Wiring “out of phase” results in
thin sound, weak bass and a poor
stereo image.
With the advent of multichannel
surround sound systems,
connecting all of the speakers in
your system with the correct
polarity remains equally important
in order to preserve the proper
ambience and directionality of the
program material.
To use the binding-post speaker
terminals, unscrew the colored
collar until the pass-through hole
in the center post is visible under
the collar. Insert the bare end of
the wire through this hole; then
screw the collar down until the
connection is tight. The hole in
the center of each collar is
intended for use with banana-
type connectors.
MODELS: N24II, N24AWII, N26AWII
MODEL: N-CENTERII
Receiver
Speaker Outputs
– +
CENTER
CENTER
– +
MODEL: N-CENTERII
0 – 2 ft.
The N-CENTERII center channel
loudspeaker is designed to
complement all of the
Northridge Series loudspeakers.
It is the ideal way to re-create the
cinematic experience in your home.
MODELS: N24II, N24AWII, N26AWII, N-CENTERII
The supplied self-adhesive felt
pads may be attached to the
bottom corners of your speakers
to protect your furniture.
– +– +
– +
Receiver
Speaker Outputs
LEFT
RIGHT
– +
Place pads here