JBL MRX 515 Speaker User Manual


 
4
5
MRX525 - Dual 15¨, two-way, bass-reflex
MRX528S - Dual 18¨ bass-reflex subwoofer
Frequency Range (-10 dB): 40 Hz - 20 kHz
Frequency Response (±3 dB): 57 Hz - 20 kHz
Coverage Pattern: 70º x 70º nominal
Crossover Mode: Passive
Crossover Frequency: 1.8 kHz
Power Rating: 800 W / 1600 W / 3200 W, 2 hrs
1
(Continuous / Program / Peak) 700 W / 1400 W / 2800 W, 100 hrs
1
Maximum SPL: 129 dB SPL continuous (135 dB SPL peak)
2
System Sensitivity (1w @ 1m): 100 dB SPL
LF Driver: 2 x JBL 265H 380 mm (15 in) Differential Drive
®
woofers
HF Driver: 1 x JBL 2408H 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver
Nominal Impedance: 4 ohms
Enclosure: Trapezoidal, 15/18 mm, plywood
Transport: 2 x die-cast handles with backing cup
Finish: Black DuraFlex™ finish
Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent black screen
backing.
Input Connectors: Neutrik® Speakon® NL-4 (x2)
Dimensions (H x W x D): 1240 mm x 535 mm x 460 mm; (48.75 in x 21.0 in x 18.0 in)
Net Weight: 38.2 kg (84 lb)
1
IEC standard, full bandwidth pink noise with 6 dB crest factor for specified period
2
Calculated based on power rating and sensitivity
Frequency Range (-10 dB): 35 Hz - 250 Hz
Frequency Response (±3 dB): 40 Hz - 250 Hz
Input Connection Modes: Internally configurable, +1/-1 or +2/-2
Recommended Crossover Frequencies: 80-120 Hz, 24-48 dB/octave
Power Rating: 1000 W / 2000 W / 4000 W, 2 hrs
1
(Continuous / Program / Peak) 800 W / 1600 W / 3200 W, 100 hrs
1
Maximum SPL: 133 dB SPL continuous (139 dB SPL peak)
2
System Sensitivity (1w @ 1m): 97 dB SPL; 103 dB SPL
2
LF Driver: 2 x JBL 2044H 457 mm (18 in) woofers
Nominal Impedance: 4 ohms
Enclosure: Rectangular, 18 mm, birch plywood
Finish: Black DuraFlex™ finish
Grille: Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen
backing.
Input Connectors: Neutrik® Speakon® NL-4 (x2)
Dimensions (H x W x D): 1095 mm x 535 mm x 700 mm (43 in x 21 in x 27.5 in)
Net Weight: 55 kg (121 lb)
1
40 Hz to 400 Hz pink noise with 6 dB crest factor for specified period
2
Calculated on half space condition
SPECIFICATIONS
Infrasonic Filter Settings
It is a good practice to use a High Pass Filter (HPF) to prevent frequencies below the system tuning fre
-
quency from reaching the speaker. Inputting these frequencies to the speaker will not result in any appre
-
ciable acoustic output but will put needless mechanical stress on the woofer and reduce available amplifier
headroom. A High Pass Filter will protect your MRX500 system from excess infrasonic energy with little, if
any loss of significant program content. Refer to the above chart for infrasonic filter settings.
MRX518S - 18¨ bass-reflex subwoofer
Frequency Range (-10 dB): 40 Hz - 200 Hz
Frequency Response (±3 dB): 45 Hz - 200 Hz
Input Connection Modes: Internally configurable, +1/-1, +2/-2
Recommended Crossover Frequencies: 80-120 Hz, 24-48 dB/octave HPF
Power Rating : 500 W / 1000 W / 2000 W, 2 hrs
1
(Continuous / Program / Peak) 400 W / 800 W / 1600 W, 100 hrs
1
Maximum SPL: 127 dB SPL continuous (133 dB SPL peak)
2
System Sensitivity (1w @ 1m): 94 dB SPL, 100 dB SPL
2
LF Driver: 1 x JBL 2044G 457 mm (18 in) woofer
Nominal Impedance: 4 ohms
Mounting: Top mounted 35 mm socket for optional SS3-BK pole
Enclosure: Rectangular, 18 mm, plywood
Finish: Black DuraFlex™ finish
Grille: Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing.
Input Connectors: Neutrik® Speakon® NL-4 (x2)
Dimensions (H x W x D): 560 mm x 535 mm x 700 mm (22 in x 21 in x 27.5 in)
Net Weight: 32.5 kg (72 lb)
Optional Accessories: SS3-BK; Satellite speaker pole
1
40 Hz to 400 Hz pink noise with 6 dB crest factor for specified period
2
Calculated on half space condition
Recommended Amplifier
Power
Infrasonic Filter
Settings
Model Full-Range / Parallel HPF 24dB/octave
MRX512M
MRX515
MRX525
MRX518S
MRX528S
800 to 1,600W@8
800 to 1,600W@8
1,600 to 3,200W@4
1,000 to 2,000W@4
2,000 to 4,000W@4
63 Hz
50 Hz
40 Hz
31 Hz
31 Hz
SPECIFICATIONS
Recommended Amplifier Power