Filter
Top Products
– 20 –
Rear Channel Volume
Surround
Calibrate
+–
Surround
Calibrate
+–
Surround
Calibrate
+–
Push “Calibrate” on the
remote control until “Rear”
appears in the display and the
corresponding LED on top of
the display is lit.
Push “+” on the remote con-
trol to increase the volume
of the rear channels.
Push “–” on the remote
control to decrease the
volume of the rear channels.
Delay Time
The delay control allows the
user to set the surround delay
between 15 and 30 milli-
seconds in 1 millisecond incre-
ments. The best setting will
depend on the distance
between the main listening
area and the front speakers as
well as the distance between
the main listening area and
the rear speakers.
The chart at the bottom shows
the recommended settings.
0 5 10 15 20 25 30 35 40
40
35
30
25
20
15
10
5
0
15ms
15ms
15ms
20ms
25ms
30ms
30ms
30ms
Distance (in feet) From Front Speakers
Distance (in feet) From Rear Speakers
Preferable Acceptable
Surround
Calibrate
+–
Surround
Calibrate
+–
Surround
Calibrate
+–
Push “Calibrate” on the
remote control until “Delay”
appears in the display and the
corresponding LED on top of
the display is lit.
Push “+” on the remote
control to increase the
delay time.
Push “–” on the remote
control to decrease the
delay time.
ESC550 Simply Cinema OM 7/22/98 4:34 PM Page 20