Filter
Top Products
Specifications
HLS410 HLS610 HLS810 HLS615 HLS620 HLS820 HLS Center
F
requency Response 75Hz – 20kHz 55Hz – 20kHz 50Hz – 20kHz 45Hz – 20kHz 42Hz – 20kHz 40Hz – 20kHz 80Hz – 20kHz
(±3dB)
Sensitivity 86dB 88dB 89dB 88dB 89dB 90dB 88dB
@ 2.83 volts/1 meter
Recommended 100 watts 125 watts 150 watts 150 watts 200 watts 250 watts 150 watts
Maximum Amplifier
Power*
Nominal Impedance 8 ohms 8 ohms 8 ohms 8 ohms 8 ohms 8 ohms 8 ohms
Crossover Frequency 3000Hz 2700Hz 2600Hz 2700Hz 2700Hz 2600Hz 2800Hz
Low-Frequency 4" 6-1/2" 8" 6-1/2" Dual 6-1/2" Dual 8" Dual 5-1/4"
Transducer polypropylene polypropylene polypropylene polypropylene polypropylene polypropylene polypropylene
High-Frequency 10mm polycarbonate dome attached
Transducer to Constant-Directivity Horn
Dimensions 10 x 5-1/2 x 16-1/4 x 8-5/16 x 19-7/16 x 9-3/4 x 31-3/4 x 8-5/16 x 35-3/4 x 8-5/16 x 39-3/4 x 9-3/4 x 7-1/16 x 20-3/8 x
(H x W x D) 6-1/8" 9-7/16" 9-3/4" 9-7/16" 11-7/16" 11-7/16" 6-1/2"
254 x 140 x 156mm 413 x 211 x 240mm 494 x 248 x 248mm 806 x 211 x 240mm 908 x 211 x 291mm 1010 x 248 x 291mm 179 x 518 x 165mm
Weight 12 lbs/5.5 kg 14 lbs/6.4 kg 21 lbs/9.5 kg 28 lbs/12.7 kg 35 lbs/15.9 kg 39 lbs/17.7 kg 15 lbs/6.8 kg
Occasional refinements may be made to existing products without notice but will always meet or exceed original specifications unless otherwise stated.
*The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks.
We do not recommend sustained operation at these maximum power levels.
HLS Series OM 9/11/98 11:50 AM Page 5