Filter
Top Products
SPECIFICATIONS
ES150P ES250P
Frequency Response 27Hz – 150Hz 25Hz – 150Hz
Amplifier RMS Power 300 Watts 400 Watts
Amplifier Peak Dynamic Power
†
500 Watts 700 Watts
Crossover Frequency 50Hz – 150Hz; 50Hz – 150Hz;
24dB/octave, continuously variable 24dB/octave, continuously variable
Driver 10" (250mm) PolyPlas
™
12" (300mm) PolyPlas
™
Dimensions (H x W x D) 18" x 13-1/4" x 15-1/4" 19-3/4" x 15-3/4" x 16-7/8"
(with grille) (457mm x 337mm x 387mm) (502mm x 400mm x 428mm)
Weight 39 lb (17.7kg) 43 lb (19.5kg)
† The Peak Dynamic Power is measured by recording the highest center-to-peak
voltage measured across the output of a resistive load equal to minimum impedance
of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.
ES150/250P (12V) OM 6/21/07 3:03 PM Page 9