Filter
Top Products
ES150PW ES250PW
Frequency Response 27Hz – 150Hz 25Hz – 150Hz
Amplifier RMS Power 300 Watts 400 Watts
Amplifier Peak Dynamic Power
†
500 Watts 700 Watts
Crossover Frequencies 50Hz – 150Hz; 24dB/octave, 50Hz – 150Hz; 24dB/octave,
continuously adjustable continuously adjustable
when activated when activated
Driver 10" (250mm) PolyPlas
™
12" (300mm) PolyPlas
™
Operating Range Up to 75' (22m), depending upon conditions Up to 75' (22m), depending upon conditions
RF Operating Frequency 2.4GHz 2.4GHz
Subwoofer Dimensions 18" x 13-1/4" x 16-1/8" 19-3/4" x 15-3/4" x 17-7/8"
(H x W x D) (457mm x 337mm x 409mm) (502mm x 400mm x 454mm)
Transmitter Dimensions 3-3/4" x 4-7/8" x 3-15/16" 3-3/4" x 4-7/8" x 3-15/16"
(H x W x D) (95mm x 124mm x 100mm) (95mm x 124mm x 100mm)
Subwoofer Weight 39 lb (17.7kg) 43 lb (19.5kg)
Transmitter Weight 0.5 lb (0.2kg) 0.5 lb (0.2kg)
†
The Peak Dynamic Power is measured by recording the highest center-to-peak
voltage measured across the output of a resistive load equal to minimum impedance
of the transducer,using a 50Hz sine wave burst, 3 cycles on,17 cycles off.
SPECIFICATIONS
MAINTENANCE AND SERVICE
The enclosure may be cleaned using a soft cloth to remove fingerprints or
to wipe off dust.
The grille may be gently vacuumed. Stains may be removed with an aerosol
cleaner, following its instructions. Do not use any solvents on the grille.
All wiring connections should be inspected and cleaned or remade periodically.
The frequency of maintenance depends on the metals involved in the connections,
atmospheric conditions and other factors, but once per year is the minimum.
In the event that your subwoofer ever needs service, contact your local JBL dealer,
or visit www.jbl.com for a service center near you.
JBLP2706_ES150-250PW-120om 5/20/08 4:15 PM Page 7