Filter
Top Products
10
† The Peak Dynamic Power is measured by recording the highest center-to-peak voltage
measured across the output of a resistive load equal to minimum impedance of the
transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.
CS6100
S
ATELLITES
Frequency Response (–6dB): 100Hz – 20kHz
Recommended Amplifier Power Range: 10 – 100 Watts
Sensitivity (2.83V @ 1 meter): 88dB
Nominal Impedance: 8 Ohms
Crossover Frequency: 3.0kHz; 12dB/octave
High-Frequency Driver: 1/2" (13mm) Titanium-laminate dome, magnetically shielded
M
idrange Driver:
D
ual 3-1/2" (89mm), magnetically shielded
Dimensions (H x W x D): 11-3/8" x 5-1/8" x 3-3/8" (289mm x 131mm x 86mm)
Weight: 3.2 lb (1.5kg)
CENTER
Frequency Response (–6dB): 100Hz – 20kHz
Recommended Amplifier Power Range: 10 – 100 Watts
Sensitivity (2.83V @ 1 meter): 88dB
Nominal Impedance: 8 Ohms
Crossover Frequency: 3.0kHz; 12dB/octave
High-Frequency Driver: 1/2" (13mm) Titanium-laminate dome, magnetically shielded
Midrange Driver: Dual 3-1/2" (89mm), magnetically shielded
Dimensions (H x W x D): 5-1/4" x 11-3/8" x 3-3/8" (133mm x 289mm x 86mm)
Weight: 3.2 lb (1.5kg)
SUBWOOFER
Frequency Response (–6dB): 30Hz – 120Hz
Amplifier: 150W RMS/300W Peak
†
Driver: 10" (250mm)
Dimensions (H x W x D, including feet): 18-1/2" x 12-3/4" x 15" (470mm x 324mm x 381mm)
Weight: 41 lb (18.6kg)
SPECIFICATIONS
CS6100-120V om.qxd 12/15/06 4:26 PM Page 12