Filter
Top Products
The 4344MkII loudspeakers can be connected by one of several meth-
ods. The binding posts on the rear panel of the
4344MkII will accept
most types of audio cable and connectors, including banana plugs and
bare wire (Figure 3). Follow the hookup method that best describes your
system.
1. For each channel, connect the red (+) terminal on the
4344MkII to the red (+) terminal on your amplifier.
2. For each channel, connect the black (–) terminal on the
4344MkII to the black (–) terminal on the amplifier.
Connecting the systems in this manner ensures that they will operate in
phase; that is, they will work together rather than in opposition.
Connecting the speaker system out of phase will not cause damage but
will adversely affect the speaker’s sound.
No.
9
Speaker Connections
LOW FREQUENCY
HIGH FREQUENCY
LOW FREQUENCY
JBL INCORPORATED
8500 BALBOA BLVD. NORTHRIDGE, CA USA
HIGH FREQUENCY
JBL INCORPORATED
8500 BALBOA BLVD. NORTHRIDGE, CA USA
Figure 3 Connections
Banana/Spade
Connecting Method
Bare Wire
Connecting Method
LOW FREQUENCY
HIGH FREQUENCY
JBL INCORPORATED
8500 BALBOA BLVD. NORTHRIDGE, CA USA
Figure 4 Standard
Connecting Method
Standard Connections (Figure 4)
4344 MK 11 Manual 7/21/98 3:18 PM Page 8