Filter
Top Products
5
3. Set the GE 99004’s Receive/Transmit switch to Transmit
and turn it ON. When powered on, the 99004 will search
for a Bluetooth
®
receiver and if it has already been paired
with the receiving device, automatically connect. If the
devices have not been paired previously, press the front
panel “pairing” button (with Bluetooth
®
logo) to pair the
devices and link them. The GE 99004’s Pairing LED will
fl ash quickly during this process and stay ON when
pairing is complete. When unlinked, the LED will blink
slowly. Note: When in “Transmit” mode, the LED is blue.
4. Play music from the source device. The audio should
stream to the receiver so that you can hear it through
your headphones.
Note: It may take up to 2 minutes for the GE 99004 and your
Bluetooth
®
audio device to pair. While the GE 99004 and
your audio transmitter is pairing you will see the Blue LED on
the GE 99004 fl ashing quickly. Once your GE 99004 is paired
you will see a slow and steady blinking.
Advanced Audio Controls
If your audio device supports it, you can use the IR remote
control or front panel pushbuttons to control (volume, play,
pause, previous track, next track) your audio device. This
only works if your other Bluetooth
®
-enabled audio devices
offer this feature.
Turning Off the Unit
If you don’t want to use the transceiver, turn it OFF with the
slide switch. It can easily be paired back up to your devices
the next time you choose to use it. While turning the unit
“ON” or “OFF”, you’ll hear a dual-beep indicating that the
power setting has cycled.