Filter
Top Products
120
110
100
90
80
70
60
50
40
30
20
100 200 500 1k 2k 5k 10k 20k
dB (SPL)
▼O-axis
▲On-axis
WaveGuide Normal tweeter
WaveGuide
WaveGuide refers to the unique way Jamo has shaped the tweeter’s face-
plate. The result is a controlled sound pattern with a more open and dynamic
reproduction of sound. WaveGuide makes it easier to position the speakers
in the room.
Another big challenge is to secure a uniform dispersion pattern in the tre-
ble and midrange frequencies. In general, dispersion gets narrower at high-
er frequencies. Consequently in the area where the mid/woofer and the
tweeter should integrate smoothly, the mid/woofer has a narrow dispersion
and the tweeter has a wide dispersion. This problem is solved with the Jamo
WaveGuide. The completely smooth design of the WaveGuide also reduces
diraction to an absolute minimum. Finally, the WaveGuide increases treble
output in the lower treble range which means the tweeter needs less power for
the same SPL. So, power handling is improved and distortion is reduced.
Jamo Tech platforms
The WaveGuide results in a uniform treble dispersion pattern from
10kHz all the way down to the critical x-over point at 2kHz and thus
secures a seamless transition to the mid/woofer – both when listen-
ing on and o axis.
125
120
115
110
105
100
95
90
85
80
75
70
Overplot
60.0 100.0 1000.0
dB
Normal face plate DTT
DTT (Decoupled Tweeter Technology)
DTT* (Decoupled Tweeter Technology) is a remarkable mounting system
specially developed by Jamo.
One of the biggest challenges when designing speakers is preventing unwanted
cabinet vibrations from clouding or colouring the sound. High frequencies are
particularly susceptible. This problem is solved using the ingenious Jamo DTT.
By decoupling the tweeter from the rest of the loudspeaker, vibrations trans-
mitted from the front bae to the tweeter are reduced by more than 20dB
resulting in an uncommonly detailed and realistic reproduction of high fre-
quencies.
* Patent pending
Dierence between vibrations in a normal face-plate and vibra-
tions in a face-plate employing Decoupled Tweeter technology.
Jamo C 80 page 05