Filter
Top Products
6
English
7
English
For optimal performance, place your Jabra SP500 in direct line of sight with your Bluetooth
mobile phone. You will get better performance when there are no obstructions (including
parts of your body ) between the Jabra SP500 and your mobile phone. Ensure that the
microphone is pointing towards your mouth for optimal sound clarity.
The Jabra SP500 comes with two mounting options for your vehicle.
• A clip for attaching to the sun visor
(See fig. 3)
and suction mount for use on the
windscreen.
(See fig. 4)
To release the clip or suction mount – just pull the clip or suction
mount outwards. (See fig. 3.3 and 4.3)
Choosing speakerphone placement
12
English
Replacing the batteries
13
The Jabra SP500 comes complete with two 1.2-volt (AA) rechargeable batteries.
You may have to eventually replace the batteries. Please use standard rechargeable
1.2 volt (AA 2000 mAh) NiMh batteries.
1. Remove the back cover from the speakerphone and replace both batteries as
indicated. Re-attach the back cover to the speakerphone.
(See fig. 5)
Enhanced features (for Bluetooth mobile phones
with hands-free profile)
14
Bluetooth profiles⁴
are protocols through which Bluetooth devices communicate with
each other. Bluetooth phones support different sets of profiles – most support both
headset and hands-free profile. In order for Bluetooth devices to talk to each other they
need to support the same Bluetooth profile. Jabra SP500 supports both the headset and
hands-free profiles.
Although the Jabra SP500 is compatible with Bluetooth phones with either Bluetooth
profile, enhanced features are available for phones that support the hands-free Bluetooth
profile. Check your phone’s instruction guide or contact the phone manufacturer to find
out if your phone supports the hands-free Bluetooth profile.
Enhanced features:
• Last number redial
(when not on a call)
While the speakerphone is on, press and hold until you hear
2
short beeps,
release immediately.
• Rejecting an incoming call
(when not on a call)
When your phone rings, press and hold until you hear
2
short beeps, release
immediately.
• Call-waiting
(swapping between 2 calls)
When your phone notifies you of another incoming call while you’re on a call, press
and hold until you hear
2
short beeps, release immediately.
• Putting a call on hold
While you’re on a call, press and hold until you hear
2
short beeps, release
immediately. Repeat to retrieve the call.
Office mode creates the appropriate sound sensitivity to provide optimal performance
of the Jabra SP500 in the office or home environment. It's recommended that you only
use this mode in mentioned enviroment.
• By pressing and holding the mute button for 5 seconds you will see the blue LED flash
rapidly and hear a short beep
• To return to normal mode, repeat the above action
When Jabra SP500 is in office standby mode, blue LED flashes twice every 3 seconds.
For optimal performance during teleconferences, please ensure all participants
face the microphone
Office mode
11
IMPORTANT: Ensure that the speakerphone does not obstruct your view of the road or
other road users. It is the owner’s responsibility to ensure that the Jabra SP500 does not
create a safety hazard and that its positioning complies with E.U., country, and/or local
laws. The Jabra SP500 should also be positioned such that it does not interfere with
any vehicle safety equipment, including air bags. The Jabra SP500 should be positioned
securely. Please be aware that in the event of a crash, loose objects may contribute to
driver injury by becoming projectiles.