Jabra SP 500 Headphones User Manual


 
10
English
English
11
China
Conforms to the provisions on the Radio Regulations of China.
Republic of Korea
Certified under the provisions of Regulations on Certification of Information and
Communication Equipment by Director General of Radio Research Laboratory (Ministry
of Information and Communication)
Taiwan
Approved by The Directorate General of Telecommunications (Ministry of
Transportation and Communications).
Singapore
Approved by the Infocomm Development Authority of Singapore (IDA) for sale and use
in Singapore.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
CE
This product is CE marked according to the provisions of the R & TTE Directive (99/5/EC).
Bluetooth
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by Jabra is under license.Other trademarks and trade names are those
of their respective owners.
Certification and safety approvals
19
1
Bluetooth
is a radio technology developed to connect devices, such as mobile
phones and headsets, without wires or cords over a short distance of approximately
10 metres (approx 30 feet). More information is available at www.bluetooth.com
2
Pairing
creates a unique and encrypted communication link between two
Bluetooth enabled devices and allows them to communicate with each other.
Bluetooth devices will not work if the devices have not been paired with each other.
3
Passkey or PIN
is a secret code that needs to be entered on the phone in order to
pair the mobile phone with the Jabra SP500. When you have already paired your
mobile phone with the speakerphone, the phone and the Jabra SP500 will recognize
each other and the phone will bypass the discovery and authentication process and
automatically accept the transmission.
4
Bluetooth profiles
are protocols through which Bluetooth devices communicate
with other devices. Bluetooth phones support different sets of profiles – most
support the headset profile but some support the hands-free profile and others
support both profiles. In order to support a certain profile, a phone manufacturer
has to implement certain mandatory features within the phone’s software.
5
Active mode
is when the speakerphone has an active call in progress. Jabra SP500
will go from standby mode into active mode when you receive a call or when you
make a call. When the speakerphone is in active mode, the blue light will flash every
second.
6
Standby mode
is when the Jabra SP500 is passively waiting for a call. When you
“end” the call on your mobile phone, the speakerphone will go into standby mode.
When Jabra SP500 is in standby mode, the blue light will flash every three seconds
for one minute.
Glossary
20
Unless otherwise instructed in the User Manual, the user may not, under any
circumstances, attempt to perform service, adjustments or repairs on this unit,
whether in or out of warranty. It must be returned to the purchase point, factory or
authorized service agency for all such work.
Jabra (GN Netcom) will not assume any responsibility for any loss or damage
incurred in shipping. Any repair work on Jabra (GN Netcom) products by
unauthorized third parties voids any warranty.