Filter
Top Products
6
English
7
English
12
11
10
8
9
Using a Jabra Bluetooth adaptor
If you want to use the Jabra BT500 with a non-Bluetooth mobile phone, the Jabra A210
adaptor is the answer.
It gives you a cordless connection with the following headset features: answer/end call,
voice dial function (if supported by the phone) and mute. Rejecting a call, last number
redial and putting a call on hold might not be supported through the headset jack in the
mobile phone.
To pair the Jabra BT500 with the Jabra A210
The pairing process is a little different:
• Put your Jabra BT500 in pairing mode.
• Put the Jabra A210 adaptor in pairing mode.
• Place them close together. You do not need a dedicated pin code to pair the two
Jabra products. Consult the Jabra A210 user manual for more information.
Making/answering a call when using the Jabra A210
• When you make a call from your mobile phone, the call will automatically transfer to
the headset (if it is turned on).
• To answer a call: either
tap the answer/end button on your headset or press the
answer button on your mobile phone.
Troubleshooting & FAQ
I hear crackling noises
For the best audio quality, always wear your headset on the same side of the body as
your mobile phone.
I cannot hear anything in my headset
• Increase the volume on the headset.
• Ensure that the headset is paired with the phone.
• Make sure that the phone is connected to the headset – if it does not connect either
from the phone’s Bluetooth menu or by tapping the answer/end button, follow the
pairing procedure (see section 3).
I have pairing problems even though my phone indicates otherwise
You may have deleted your headset pairing connection in your mobile phone.
Follow the pairing instructions in section 3.
Will the Jabra BT500 work with other Bluetooth equipment?
The Jabra BT500 is designed to work with Bluetooth mobile phones. It can also work
with other Bluetooth devices that are compliant with Bluetooth version 1.1 or 1.2
and support a headset and/or hands-free profile.
I cannot use Reject call, call on hold, Redial or voice dialling
These functions are dependent on your phone supporting them. Please check your
phone’s manual for further details
Need more help?
See the inside cover for your country’s support details.
Taking care of your headset
• Always store the Jabra BT500 with the power off and safely protected.
• Avoid storage at extreme temperatures (above 45
°C/113°F – including direct sunlight
– or below -10
°C/14°F). This can shorten battery life and may affect operation. High
temperatures may also degrade performance.
• Do not expose the Jabra BT500 to rain or other liquids.
Warranty
Jabra (GN Netcom) warrants this product against all defects in material and workmanship
for a period of two years from the date of original purchase. The conditions of this
warranty and our responsibilities under this warranty are as follows:
•
The warranty is limited to the original purchaser
•
A copy of your receipt or other proof of purchase is required. Without proof of
purchase, your warranty is defined as beginning on the date of manufacture as
labelled on the product
•
The warranty is void if the serial number, date code label or product label is
removed, or if the product has been subject to physical abuse, improper installation,
modification, or repair by unauthorized third parties
•
The responsibility of Jabra (GN Netcom) products shall be limited to the repair or
replacement of the product at its sole discretion
•
Any implied warranty on Jabra (GN Netcom) products is limited to two years from the
date of purchase on all parts, including any cords and connectors