Filter
Top Products
Charging & Battery Time
Before you can use your JABRA BT200 headset, you
need to carefully place the headset in the charging
cradle and fully charge the headset’s self-contained
battery. See Figs 1 & 2 (Please note that the headset
can be ON or OFF while charging). A fully charged
battery provides upto 3 hours of talktime, and upto
96 hours of standby time.The JABRA BT200 battery
does not need to be completely used before charging
– you can re-charge the product at any time. If the
charger is left connected and charging – it will not
over charge the battery.
To charge the headset please follow this guide:
1. Insert the travel charger’s electrical plug into an
electrical outlet.
2. Plug the mains travel charger connector into the
port on your charging cradle.
Attaching the charger cradle clip
The charging cradle can be fastened to
your belt or clothes using the supplied
clip.To attach the clip to the cradle
follow these simple instructions:
1. Locate the two slots on the
charging cradle as shown.
2. Position the clip with
one end in the top slot
on the cradle.
3. Press the clip gently onto the
charger cradle until the other end
fits into the bottom slot securely.
4. You will hear a clicking sound
when this is correctly attached.
10 11
1
2
3
1
2