Filter
Top Products
RELEASE YOUR JABRA
4
US
F
ES
PT
Jabra BT125 Bluetooth headset
5
US
F
ES
PT
6. Turning your headset on and off
• To turn on your headset press the answer/end button until you see a
burst of blue flashes on the indicator light (LED)
• To turn off your headset press and hold the answer/end button until you
see a burst of blue flashes on the indicator light (LED)
7. Pair it with your phone
Before you use your Jabra BT125, you need to pair it with your mobile
phone. (Follow step 1-4 in fig. 3).
1. Put the headset in pairing mode
• Make sure the headset is off .
• Press and hold the answer/end button until a solid blue light comes on.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT125
Follow your phone’s instruction guide. This usually involves going to a
‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the
option to ‘discover’ or ‘add’ a Bluetooth device.* (See example from a
typical mobile phone in fig. 3).
3. Your phone will find the Jabra BT125
Your phone then asks if you want to pair with it. Accept by pressing ‘Yes’ or
‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4 zeros).
Your phone will confirm when pairing is complete. In case of unsuccessful
pairing, repeat steps 1 to 3.
8. Wear it how you like it
The Jabra BT125 is ready to wear on your right ear. If you prefer the left,
gently pull out the earhook, rotate the ear hook 180°, and insert. (See fig. 4).
The earhook can be adjusted to fit your ear better – adjust the back edge of
the earhook for a more secure fit.
For optimal performance, wear the Jabra BT125 and your mobile phone on
the same side of your body or within line of sight. In general, you will get
better performance when there are no obstructions between your headset
and your mobile phone. (See fig. 5).
3. What your new headset can do
Your Jabra BT125 lets you do all this (dependent on your phone
supporting the function):
• Answer calls
• End calls
• Reject calls*
• Voice dialing*
• Last number redialing*
• Call waiting*
• Place call on hold*
* Phone dependent
Specifications
• Talk time up to 8 hours/standby time up to 170 hours
• Rechargeable battery with charging option from AC power supply, PC via
USB cable or car charger (PC USB cable and car charger sold separately)
• Weight
1
/
2
oz (14g)
• Operating range up to 33 feet (10 meters)
• Headset and hands-free Bluetooth profiles
• Bluetooth specification (see glossary page 10) version 2.0
4. Getting started
The Jabra BT125 is easy to operate. The answer/end button on the headset
performs different functions depending on how long you press it.
5. Charge your headset
Make sure that your Jabra BT125 headset is fully charged for 2 hours before
you start using it. Use the AC power supply to charge from a power socket.
Connect your headset as shown in fig. 2. When the light indicator (LED) is
solid blue, your headset is charging. When the solid blue LED light turns off, it
is fully charged. (Follow step 1-2 in fig. 2).
Instruction: Duration of press
Tap Press briefly
Press Approx: 1 second
Press and hold Approx: 5 seconds