Filter
Top Products
Q How can I use my Headset wItH my mobIle pHone?
(Jabra pro 9470 only).
A To be able to do this, you need to pair the Jabra PRO 9470
base with your mobile phone (your headset is based on DECT
and cannot be paired directly with your mobile phone). Do
the following:
- Refer to the section “Re-running the Setup Wizards” which
explains how to launch the mobile phone part of the setup
wizard. This puts the headset’s base into pairing mode,
which causes it to advertise itself as ‘available for pairing’.
- Make sure that Bluetooth
®
is active on your mobile
phone and put it into Bluetooth
®
pairing mode. The exact
procedure for doing this varies according to brand and
model. See your user manual for details.
- Remember that the headset identifies itself as “Jabra PRO
9470” — you need to find and select this on your phone. You
might also be prompted to enter the pass code “0000” (four
zeros) to accept pairing. If you need more on this, see the
section called “Using Jabra PRO 9470 with a mobile phone”
in the user manual.
Q How many bluetootH
®
devIces can I Have connected
to tHe Jabra pro 9470 base?
A Only one. The Jabra PRO 9470 base supports Bluetooth
®
so
that you can use your mobile phone with your headset.
Q How do I paIr my Headset wItH tHe
Jabra pro 9400 base?
A If you dock a Jabra PRO 9400 base and headset that are not
paired, the touch screen asks if you would like to pair the
headset — either as a primary or secondary device. If you
choose to pair it as secondary, the connection is temporary,
lasting only until the end of the next (or current call). This
feature is meant to facilitate conference calling.
Touch the ‘confirm’ icon to pair them; touch the ‘cancel’ icon
to prevent pairing (while still charging the headset).
If you dock a headset to a Jabra PRO 9400 base with which
it is already paired, no pairing notification appears. For more
information, see the section called “Pairing and Connecting
the Base and Headset” in the user manual.
Q can I paIr my Headset dIrectly wItH a tHIrd-party
dect pHone?
A No, you can only pair the headset with a Jabra PRO 9400
base (it is not Generic Access Profile (GAP) compliant). This
is because Jabra PRO 9400 uses an enhanced version of the
DECT standard, thereby enabling many of its advanced call-
handling features. These enhancements are not supported by
third-party manufacturers.
Q wHy doesn’t my computer detect tHe
Jabra pro 9400 base?
A Try connecting the base to another USB port on the PC.
Also, please note that it is recommended to have a direct
connection - i.e. with no USB hub in between.
Q wHy doesn’t my Headset work wItH my desk pHone /
softpHone / mobIle pHone (Jabra pro 9470 only)?
A Please check the following:
- Make sure the headset is charged. The LED lights a constant
yellow color while charging, then shows no light at all (only
state indication) when fully charged.
- Make sure the headset is within range of the base (up to
150m) and that the mobile is within range of the base (up to
10m).
- The base / mobile phone and the headset may no longer be
paired. Refer to the questions about pairing these devices,
above.
Q notHIng Happens wHen I try to use my desk pHone.
A Check the following:
- Make sure the Jabra PRO 9400 base is powered on (check
that the touch screen is on).
- Make sure the desk phone is the current target. See the
section called “The Target Phone Concept” for more.
- Make sure the audio link to the desk phone is active (e.g.,
by tapping the headset multifunction button or touching
the activate-audio-link icon on the touch screen)
- Make sure that the telephone has an active connection to
the phone network (i.e. its handset is off the hook or its
headset button is pressed).
- Re-run the desk phone set-up wizard.
FAQ
JABRA PRO
TM
9400 SERIES
V02_0907
Frequently asked questions
stay in touCH around tHe oFFiCe
WWW.JABRA.COM
JABRA
®
IS A REGISTERED TRADEMARK OF GN NETCOM A/S