Filter
Top Products
Media Player User Guide
23
z USER: Use this function to set a color temperature to suit you own preference.
z 9300K: Select to set monitor for the CIE coordinate 9300 color temperature
z 6500K: Select to set monitor for the CIE coordinate 6500 color temperature
z 5500K: Select to set monitor for the CIE coordinate 5500 color temperature
GAMMA
Adjust the settings for GAMMA value. Press "+" or "-" button to select the GAMMA
setting group from 0 to 3.
PHASE
Adjust the Phase control of screen. Press "+" or "-" button to
Phase adjustment may be required to optimize the display quality.
OSD TRANSPARENT
Adjust the OSD background color to be brightness or weakness color.
ADC ADJUST
Adjust the setting value of ADC control manual for Green Color gain, Blue color Gain,
Red color Gain, and Color Contrast/ Brightness adjustment. Press "+" or "-" to into the
ADC control menu and select the desired item.
CHANNEL
Execute to switch the input source. Press "+" or "-" button to change the input to Analog
(VGA) or Media Player channel.
RECALL
Recall the factory default settings. Press "+" or "-" button to execute this function.
SPEAKER ON/OFF
Make the speaker mute or work. Press "+" or "-" button to switch ON/OFF.
VOLUME ADJUST
Adjust the value of volume. Press "+" or "-" button to increase or decrease the value of
speaker volume.
TIMER CONTROL (optional)
Press or to enter TIMER CONTROL menu.
hr To set current hour.
min To set current minute.
sec To reset current second to 0.
BH To set boot hour.
BM To set boot second.
SH To set standby hour.
SM To set standby minute.
EXIT To exit this Timer Control menu.
Note: Default value of boot time and standby time are both 00:00. When boot time and standby