Filter
Top Products
SP5BT User Manual
13
Before use, the headset must be paired with the mobile phone. Pairing needs
to be done only once. After initial pairing, the phone and the unit can be
reconnected by pressing the multifunction button on the headset before
each use.
To pair the headset to a mobile phone:
1) Ensure the headset is powered off – the headset must be powered
off to enter pairing mode.
2) Ensure the Bluetooth radio on your mobile phone is powered on.
Please refer to the phone user manual for details.
3) Hold the multifunction key on the headset for 5 seconds. A blue
LED flashes rapidly, then changes to flash alternately red and blue.
The headset is ready to pair.
4) Set the mobile phone to search for Bluetooth devices and follow
the instructions on the phone’s screen. Please refer to the phone
user manual for details. You will recognize the iSymphony SP5BT
headset by its Bluetooth name “iSymphony SP5.”
5) Select the iSymphony SP5BT for pairing. When prompted for a
passkey, enter “1234.”
6) Select the newly paired SP5BT for connection. Within a few seconds
connection is complete and a blue LED flashes slowly on the
headset.
PAIRING