Filter
Top Products
6
f. Continue using the ►►
▐
and
▐
◄◄ and
until you have selected a song and it is playing.
You should hear this song playing through your radio.
Press the
to go back one step in the browsing menu (this is like pressing MENU on the
iPod).
To begin browsing again, press the
4 times to return to the top of the browse menu.
Complete steps c, d, e, and f to select the desired song.
Press and hold the MENU button on the remote for 2 seconds to leave the browse menu.
Now you can use the ►►
▐
and
▐
◄◄ to skip to the next track, or previous track.
If your audio playback is not clear (there is static / hiss) you may use the dTECT™ auto
scan feature to nd a clear signal for use with the WiFli.
Press to activate the dTECT™ technology feature.
Note:
dTECT is a smart FM frequency auto scanning technology developed by iSimple that
makes it easier than ever to nd a clear, clean channel on which to play an iPod or iPhone.
When the dTECT feature is activated, the WiFli™ will automatically locate and lock-on to
the best local FM frequency for iPod or iPhone playback. All you need to do is tune your
radio to the matching frequency.
6. Troubleshooting
Issue Resolution
My iPod / iPhone shows “waiting for WiFli™” Disconnect WiFli™ node from iPod / iPhone. Recon-
nect WiFli™ node into the docking port on the iPod
/ iPhone
iPod / iPhone shows “Accessory Connected”
and I can’t manually control my iPod / iPhone
Press the MENU button on the WiFli™ remote for
2 seconds; iPod / iPhone will switch back to Basic
Mode allowing use of the click wheel or touch screen.
No iPod text displayed on my radio. Verify the radio supports RDS; verify that the radio is
tuned to the correct frequency
Lots of static or background noise Run (or re-run) dTECT feature or use manual tuning
to nd a clear frequency