Filter
Top Products
Speaker A
Speaker B
Right Left
Right Left
CD player
MD recorder
Tape deck
REC(LINE)IN
PLAY OUT
REC IN
Outdoor FM antenna
Outdoor AM antenna
Ground
Indoor AM
antenna
Indoor FM
antenna
ENGLISH 10-0039
© 2010 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
Setting up your receiver
1 Finding a location for your receiver
• Install your receiver on a stable at surface.
• Position your receiver so that it can have a direct line of sight to the remote
control.
• Do not expose your receiver to extremes of temperature or humidity.
• Avoid placing your receiver on a hot surface such as on top of other hot running
equipment. Make sure that there is adequate ventilation to your receiver.
2 Connecting devices
Connecting the antennas
To connect the antennas:
1 Connect the FM antenna to your receiver.
2 Connect the AM loop antenna to the receiver.
Connecting audio components
Connecting a turntable
Connecting speakers
NOTE: If you have only one pair of speakers, connect
them to the SPEAKER A terminals.
To connect your speakers:
• Connect your speaker cables to the receiver.
Be sure to connect the speakers rmly and
correctly according to the channel (left and
right) and the polarity (+ and -). If you do
not make the connections correctly, you
will not hear any sounds from the speakers.
If the sound is unnatural and lacks bass,
the speaker polarity is incorrect.
Connecting headphones
To connect headphones:
• Insert the headphone plug into the headphone jack on the receiver.
3 Connecting the power
• Plug the power cord into an AC outlet.
Using your receiver
Listening to your receiver
Listening to your receiver:
1 Press the POWER button on the receiver to put the receiver
in Standby mode. The STANDBY indicator lights blue.
2 Press the POWER ON button on the remote control or the
ON/STANDBY button on the receiver to turn the receiver on.
3 To listen to the speakers, press the SPEAKER A or SPEAKER B button to turn
the corresponding speakers on. SPK A, SPK B, or SPK AB appears on the
display and sound can be heard from the speakers.
-OR-
To listen to the headphones, press the SPEAKER A or SPEAKER B button to
turn the corresponding speakers o. The corresponding speaker indicator
turns o, H appears on the display, and sound can be heard from the
headphones.
4 Rotate the INPUT SELECTOR knob or press the input source button to select
the input source
5 Turn on and setup the component for playback.
6 Turn the MASTER VOLUME dial or press the VOLUME / buttons to
adjust the sound level.
-OR-
Press the MUTE button to turn the sound o. MUTE ickers on the display.
Press the MUTE button again to turn the sound back on.
For additional information on using your receiver, refer to the User Guide.
Troubleshooting
For information on troubleshooting, refer to the User Guide.
Specications
For information on specications, refer to the User Guide.
FCC Part 15
This device complies with Part 15 of the FCC Rules.
FCC warning
Changes or modications not expressly approved by the party responsible for
compliance with the FCC Rules could void the user’s authority to operate this
equipment.
ICES-003 Class B Notice
This Class B digital apparatus complies with Canadian ICES-003.
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service please call 1-877-467-4289
www.insigniaproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, Minnesota, U.S.A. 55423-3645
Turntable with
MM-type cartridge
PLAY(LINE) OUT
OR