Filter
Top Products
14
Welcome
www.insignia-products.com
Connecting your amplifier
Setting up digital audio output
1 Connect the optical and coaxial output jack to the amplifier.
2 During disc play or after stopping, press Setup on the remote
control to open the System setup page.
3 Press the direction buttons to open the Audio setup page, then
move the cursor to Digital Output.
4 Select SPDIF/RAW or SPDIF/PCM, then press Enter to finish.
5 Press Setup again to exit Setup.
Using your DVD executive shelf system
Getting started
Before turning on the system, make sure that all of the connections
are correct and secure.
1 Plug the power plugs into the power outlet, then press the Power
button on the front panel to turn on the system. At this time, the
system is in Standby mode, the Red Indicator light on the front
panel is on, and the display shows the current time.
NS-A2111.fm Page 14 Friday, January 26, 2007 6:59 AM