Filter
Top Products
PLAY MODES
Every time the MODE Button is pressed, the corresponding mode appears in
the display window.
REPEAT MODE
NORMAL PLAYBACK
Play the whole disc.
Shown on the LCD display.
The current track on the disc
will be repeated.
Shown on the LCD display.
All tracks on the
disc will be
repeated.
Return to normal play. In nor-
mal mode, none of the above
symbols are shown in the
display.
INTRO SCAN AND PROGRAMMED TRACK PLAY
INTRO
Plays the first 10 seconds of each track on the disc.
1. Press the MODE/ST/MONO button until “INTRO”
text appears and flashes on the display.
2. Press the PLAY/PAUSE button. The “INTRO”
text will stop flashing and start playing “INTRO”
scan from first track to the last track on the
disc.
PROGRAM
This allows selected tracks on the disc to be played in any desired order.
To set the programmed play
Programming can be set in the STOP mode or normal play mode.
1.
Press the PROGRAM button twice when the unit is
in the stop mode or normal play mode. PROGRAM
shows in the display. The track number indicator
appears in the display.
2. Press the SKIP DOWN botton or SKIP UP button
to select the desired track.
3.
Press the PROGRAM button to enter the track in
the memory.
4.
Repeat step 2 and 3 to program the order of add-
itional tracks. Up to 20 tracks can be programmed
into the memory.
5. Press the PLAY/PAUSE button to start the pro-
grammed play.
6. To erase the programming, simply press the STOP button twice. (Programmed
tracks can also be erased by power off or opening the lid)
7.
To repeat program playback, select REPEAT ALL (for full program) or
REPEAT 1 (for desired track)by pressing the PROGRAM button while play-
ing the program.
8 9