Insignia IS-PA040717 CD Player User Manual


 
CLEANING DISCS
! Fingerprints should be carefully wiped
from the surface of disc with a sof
t
cloth.
Unlike conventional records,
compact
discs
have no grooves to
collect
dust and
microscopic
debris,
so gently wiping them
with a soft cloth
should remove most
particles
. Wipe
in a
straight motion from
the center to
the edge.
!
Never use thinner, benzine, record cleaner
or anti-static spray on a com-
pact disc.
Such chemicals can damage its plastic
surface.
MAINTENANCE
Cleaning the Cabinet
Wipe with a soft cloth. If the cabinet i
s very dirty, dampen the cloth with a weak
solution of neutral detergent and water, and then wipe clean.
Cleaning the Lens
A dirty lens will cause sound skipping and if the lens is very dirty, the CD may
not work. Open the disc cover and clean the lens as below:
! Dust or Dry Particles
Using a camera lens brush/blower
, blow
on the lens several times and wipe it
lightly
with the brush to remove dust.
Blow on
the lens one more time.
! Fingerprints
If the lens cannot be
cleaned by using
a
brush/blower,
u
se a dry
cot
ton swab
starting from the
middle and working
to the outside edge.
BASIC DISC PLAY
This CD-player can play Audio Discs such as CD-Recordables. Do not try to play
a CD-ROM, CDi, VCD, DVD or computer CD.
1. Connect the earphones to the PHONES (GREEN) socket.
2. Press the OPEN button to open the CD compartment lid.
3. Adjust the VOLUME to minimum.
4. Insert the disc with the label side facing up.
5. Close the lid securely until a click is heard.
6. Press the PLAY button to start playing.
To Emphasize the bass sound
Set the BASS BOOST switch to the ON position.
Note: The bass boost performance will depend on
the VOLUME control setting.
HOLD Switch
This switch prevents accidental selection of an
unwanted function during
Playback
or
Stop mode.
In the HOLD “ON”
position, no
function
button on
the
unit can be operated (except OPEN). Moving
the switch
to the “OFF”
position will allow the unit
to return to normal operation.
Turning Power on and off
This unit has no ON/OFF switch. To turn on and off, press the following buttons.
To turn on: Press >II PLAY/PAUSE (playback starts).
To turn off: Press ! STOP button once for standby mode.
Press ! STOP button twice to turn off the power.
Auto power-off function
When the unit is stopped (standby mode)
for approximately
30 seconds, the
power will automatically turn off.
76