Filter
Top Products
4
TSS-FMK4000
Step Three
After you have found the correct placement on the wall for the
speaker,use the template provided to draw the exact-sized hole
required.Make sure to use a level when positioning the template
to ensure that your installation is level.Then cut out the drywall
to create the hole.
Step Four
Place the mounting blocks inside the hole at either end.Use two
#8 x 1" flat-head wood screws to secure them in place.
(4) #8 x 1"
Flat-Head
Wood Screws
Screw Holes
Wall
Template
Mounting Block
Mounting
Block
NOTE:The hole for
the speaker should be
22-1/2" x 4-3/8."
INFP1614tss4000FMK-OM 10/29/04 11:39 AM Page 4