Filter
Top Products
4
TSS-CENTER4000
Step Five
Connect the wires (page 5). Replace the end caps while
capturing the wall bracket between parts A and B of the
end cap,securing it in place.
Wall-Mount
End Cap A
Wall-Mount
End Cap B
Step Four
Using the included Allen wrench,remove the top and bottom
end caps of the speaker by unscr
ewing the single center screw
on bottom.
End Cap
1/4-20 x 3/4"
Screw
End Cap
Step Six
T
he wall-bracket design allows for rotation of the speakers
at angles up to 30 degrees of center. Position the speakers
so they f
ace toward the primary listening position, before
fully tightening.
INFP1594Center-4000om 10/18/04 2:34 PM Page 4