Infinity HPS-1.5 Speaker User Manual


 
HPS-1.5/Center – Owner’s Manual
7
Final Adjustments
Check the speakers for playback by first setting the system volume control for a minimum level
and then applying power to your audio system. Play a favorite music or video segment,
increasing the system volume control to a comfortable level.
NOTE: You should hear balanced audio reproduction across the entire frequency spectrum. If not, check
all wiring connections or consult the authorized Infinity dealer where you purchased the system for
more help.
The amount of bass you hear and the stereo image quality will be affected by a number of
different factors, including the room’s size and shape, the construction materials used to build
the room, the listener’s position relative to the speakers and the position of the speakers in
the room.
Listen to a variety of music selections and note the bass level. If there is too much bass, move
the speakers away from nearby walls (see Figure 1 on page 3). Conversely, if you want more
bass, place the speakers closer to the walls.
Nearby reflecting surfaces can adversely affect stereo imaging quality. If this occurs, try angling
the speakers slightly inward toward the listening position until the desired effect is achieved.
CARE OF YOUR S
PEAKER SYSTEM
Each HPS Series enclosure has a high-quality, vinyl finish that does not require any routine
maintenance. Use a soft cloth, dampened with only water, to remove any fingerprints or to wipe
off dust.
Clean the grille by gently vacuuming or using a damp cloth.
NOTE: Do not use any cleaning products or polishes on the cabinet or grille.
HPS-1.5/4.5/Center OM 3/4/99 9:58 AM Page 7