Filter
Top Products
6
BETA ES250
FINAL ADJUSTMENTS
Check the speakers for playback first by setting the system
volume control to a minimum level, and then by applying power to
your audio system.Play a favorite music or video segment and
increase the system volume control to a comfortable level.
NOTE:You should hear balanced audio reproduction across the
entire frequency spectrum.If not,check all wiring connections or
consult the authorized Infinity dealer from whom you purchased
the system for more help.
When the Beta ES250 speakers are used as part of a Dolby
Digital or DTS
®
multichannel home theater system with a
powered subwoofer, it is recommended that you set your
receiver/processor speaker mode to “small”or “high-pass”for
all channels connected to a Beta ES250.In addition, some
receivers/processors allow you to adjust the high-pass frequency
for the “small”or “high-pass”setting. If your receiver/processor
has this capability,it is recommended that you set the high-
pass frequency to between 80Hz and 120Hz.Consult your
receiver/processor manual for more information about
these adjustments.
The placement and setup instructions in this manual are written
in general terms to cover most typical installations.We realize
that each room is different and that your specific installation may
require some modification to these guidelines.You can be sure
that if you need to install the speakers outside the guidelines in
the manual,they will still deliver excellent sound with any music
or film soundtrack.
Feel free to experiment with the Surround Mode Selector Switch
to determine the best settings in your room with your system.
CARE OF YOUR SPEAKER SYSTEM
The Beta ES250 does not require any routine maintenance.When
needed,use a soft cloth to remove any fingerprints or dust.
NOTE: Do not use any cleaning products or polishes on the
cabinet or grille.