Filter
Top Products
9
Inserting Memory Cards
The Digital Picture Frame is compatible with the following memory cards:
• Secure DigitalTM Card (SD)
• MultiMediaTM Card (MMC)
• SmartMediaTM Card
• Memory StickTM & Memory Stick ProTM
• CompactFlashTM (CF) Card
• Microdrive
®
Insert the memory card with the front label facing AWAY from you. Do not force the memory card into
the memory slot. If you are not able to easily insert the memory card completely, you may have
inserted it the wrong way.
Note:
The Digital Picture Frame will ONLY recognize digital pictures stored in JPEG format. Digital pictures
stored in other formats will be ignored by the device.
Make sure you have at least one picture stored on the memory card. The frame will not function
properly without a stored picture.
Viewing Pictures
• You can use either the remote control or the on-board buttons to control the Digital Picture Frame.
• Make sure the remote control has a battery installed.
• Insert a Memory Card and Press Power ON.
• The Slideshow will start automatically.
• Press Stop and then Setup button on the remote control to enter the Setup Menu.
• Move to Slideshow Setup by pressing the Down button. Press Enter to continue.
• Use the Down key to select the Interval Time. Use the Right direction key to enter the time
sections. Move up and down to select the desired transition time of a picture and press Enter to
select. Press Setup button to exit the Setup menu.
• Note: The Interval Time functions only when the Slide Show Mode is set to Auto.
• To disable the slideshow function, select Setup, Slideshow Setup, Slideshow Mode and
Manual. You will be able to change the displayed picture by pressing Next or Previous key.
• See “Advanced Settings” on page 11.
Microdrive
CompactFlash
SmartMedia
MultiMedia Card
8 INCH DIGITAL PICTURE FRAME