Filter
Top Products
5
TSS-800 (230V)
A Few Suggestions
We recommend that you do not operate your speakers or subwoofer
with the bass,treble and loudness controls set to full boost.This will
place undue strain on your electronics and speakers and could
damage them.
The volume control setting on your processor/preamp or receiver is
not a specific indication of the overall loudness level of the
speakers.The only important consideration is the loudness level at
which the system can be played,regardless of where the volume
control is set.
Always turn down the volume control setting on your processor/
preamp or receiver when changing sources,or switching inputs to AM
or FM operation.Excessively loud transients (clicks or popping
sounds) can damage the satellite speakers and possibly the
subwoofer.
Important!
Whenever changing cables,pulling plugs,etc.,ALWAYS TURN OFF ALL
EQUIPMENT,including the subwoofer.
SUBWOOFER CONTROLS
Rear Panel
0 Subwoofer-Level Control
1 Crossover-Frequency Adjustment
2 Phase Switch
3 LFE Input
4 Line-Level Inputs
5 Power Indicator LED
6 Power Switch
TSS-SUB800/230
¡
™
£
¢
∞
¶
§