Filter
Top Products
Omega – Owner’s Manual
◆
13
ROOM ACOUSTICS, SPEAKER POSITIONING
AND TONAL BALANCE (Continued)
If you are using two separate amplifiers in a bi-amp mode (that are inverting
types) to drive your Omega system, the aforementioned modification must be
made to the wires connecting both amplifiers to the speakers.
If the only inverting component in your system is the preamplifier or CD play-
er, all of the speaker leads (when using a single amplifier or two separate ones)
must be reversed at either the amplifier output or speaker inputs.
CAUTION: Be sure not to reverse the left and right channels. Left and right
must always be retained as “left” and “right” to ensure proper stereo integrity.
L.F.
OMEGA
EMIM
AMPLIFIER
NONINVERTING
POWER AMPLIFIER
LEFT
– +
RIGHT
– +
EMIT
+
flat
-
-
flat
NORTHRIDGE, CALIFORNIA, USA
– +
– +
L.F.
OMEGA
EMIM
AMPLIFIER
INVERTING
POWER AMPLIFIER
LEFT
– +
RIGHT
– +
EMIT
+
flat
-
-
flat
NORTHRIDGE, CALIFORNIA, USA
– +
– +
Figure 8.
Connecting inverting and
noninverting amplifiers.