iLive IS809B Speaker System User Manual


  Open as PDF
of 12
 
iLive | IS809B10
OPERATIONS
Setting the Clock
Setting the Sleep Timer
Using the Wireless Remote
Using the Auxiliary Input
Setting the Timer
1. PressandholdtheTime Setbutton.
2. WhileholdingtheTime Setbutton,pressthe
Skip/Search buttonstoadjustthehourand
minute.
3. Release the Time Setbuttontosettheadjusted
time.
1. Press the Sleepbuttonrepeatedlytoadjustthe
sleeptimerbetween60and10minutes,in10
minuteincrements.
When the set amount of time has expired, the
unit will power off.
Theincludedremoteiswirelessanddoesnot
requireline-of-sighttocontroltheunit.
Thewirelessremotecancontrolthebasestation
fromapproximatelyhalfthedistanceofthe
speakerreception.(Approximately100ftline-of-
sight,or45ftindoors)
Results will vary depending on the number and
size of obstructions between the base station
and the wireless remote.
The Volumebuttonsontheremotecontrolwill
adjustthemastervolumeofthebasestation,
affectingalllinkedspeakers.
The included speakers have independent
volume controls that can be used to ne tune
the volume of the individual speakers.
Note: The speakers need to be paired with the unit
before any audio can be heard.
1. Connectamini-phono3.5mmcable(not
included)oramini-phono3.5mmcable-RCA
R/Laudiocable(notincluded)totheAuxiliary
Inputontheunitandtheaudiooutput/
headphonejackonanMP3player,television,
or stereo system.
2. TurntheunitonbypressingthePowerbutton.
3. Press the Sourcebuttontoswitchtheunitto
Auxiliarymode.
4. AudioplayedthroughtheconnectedMP3
player,television,orstereosystemwillnowbe
heardthroughtheunit.
1. PressandholdtheTimer button.
2. WhileholdingtheTimerbutton,pressthe
Skip/Searchbuttonstoadjustthehourand
minute.
3. Release the Timerbuttontosettheadjusted
timer.
4. Press the SourcebuttontoselectiPod or
Auxiliary mode.
An iPod must be docked, or an audio source
must be connected to the Auxiliary input when
the set time is reached. Otherwise, no audio
will play when the set time is reached.
5. Press the Powerbuttontoturntheunitoff.
6. Press the Timer buttontoactivatethesettimer.
“Timer On” will appear on the LCD display
when the timer is activated.
After the set time is reached, the base station
will power on.
IMPORTANT:Thewirelessspeakersmustbe
poweredonmanuallybeforethesettimeis
reached.Thetimerwillnotpoweronthepaired
wireless speakers.
Audio Source RequiredConnector
MP3 Player mini-phono3.5mmCable(not
included)
Television mini-phono3.5mmCable-
RCAR/LAudioCable(not
included)
Stereo System mini-phono3.5mmCable-
RCAR/LAudioCable(not
included)
 previous next