iLive 1407-0603-09 Speaker System User Manual


 
CUSTOMER HELPLINE | 1-314-621-2881 iLive | IS809B 11
OPERATIONS
Resetting the Unit
Left / Right / Mono Speaker SettingsDocking an iPod
Playing a Docked iPod
Resettingthebasestationisthequickestandmost
effectivewaytosolvesmallunexpectedproblems
withthebasestation’sbehavior.
1. Usingapapercliporlikeobject,pressthe
Resetbuttontoresetthebasestationtoit’s
originalsettings.
Please note, resetting the base station will not
unpair any of the wireless speakers from the
bast station.
1. LocatethenumberedbracketthattstheiPod
thatwillbedocked.
Each included Bracket has a number on it,
indicating which iPod model that bracket is
compatible with. See the separate bracket
chart page to identify which bracket is needed.
2. SnapthebracketintoplaceovertheiPod
connectorintheDock for iPod.
3. ConnecttheiPodtotheiPodconnector.
When the unit is plugged in, using AC power,
the docked iPod will charge.
ThewirelessspeakerscanbesettoLeft,Right,or
MonobyusingtheLeft/Right/Monodialonthe
wireless speaker.
Whenplacingmultiplewirelessspeakersinclose
proximitytooneanother,sethalfofthespeakers
to LeftandtheotherhalftoRight.Thiswillcreate
astereoaudiooutput.
Whenasinglewirelessspeakerissetinalocation,
adjusttheLeft/Right/MonodialtoMono.
Note: The wireless speakers need to be paired with
the unit before any audio can be heard. See page 9
for wireless speaker pairing instructions.
1. Press the Powerbuttontoturnthebasestation
on.
2. Press the SourcebuttontoswitchtoiPod
mode.
3. Press the Play/Pausebuttontoplayorpause
thedockediPod.