iHome IHM61W Speaker User Manual


 
Using the iHM60
To unlock and expand the speaker, grip the top and bottom
and give a small twist counter-clockwise. DO NOT pull hard
once open, as the built in spring will automatically extend the
speaker to its proper position
Press speaker down from the top and twist clockwise to lock in
place.
Connecting the iHM60
The iHM60 is powered by a rechargeable battery in the
speaker. When the blue power light dims, or if you start to
notice sound distortion at higher volumes, it's time to recharge
the battery.
Connect the larger USB plug to a powered USB port, such as
that on a computer. The light on the speaker will turn to red
while charging and turn blue when fully charged.
Note: you can continue to listen to the speaker while it is
charging
Charging the iHM60
Extend the Speaker
Charging the iHM60
iHM60 IB English Back
324Wmm x 140Hmm
Print in 1C+1C Black color
July 10,09
mobile phone PSP iPod
Laptop
PC
MP3/MP4
USB 2.0
Power Switch
USB Connection
USB Connection
LED
Connect the mini-USB plug to the audio/charge input jack on
the speaker.
Connect the stereo 3.5mm audio plug to the headphone jack
or line-out of any audio device.
Slide the Power Switch of the speaker to the ON position.
The blue power light will come on.
Press play on your audio device and adjust its volume to
listen to audio.
If you wish to “daisychain” iHM60 speakers, connect the
3.5mm audio plug to the Line Out Jack on an iHM60 that is
already connected to an audio source (see above) and the
mini-USB plug to the audio input jack on another iHM60.
Note: the larger USB plug is used for charging only, not
for audio. Please refer to next section for charging
instructions.
Connect To Audio Input Source
Line-out
Jack