Filter
Top Products
Using the iHC5
Connect iHC5 to Power Source
a) Plug the AC adaptor cable into the AC adaptor jack and the other end into a standard 120 VAC wall socket. Adaptor
must be plugged in to operate. The iHC5 does not operate on batteries.
Setting the Clock
a) Press and hold the Time Zone Button until the display flashes.
b) Press the Up or Down Button to select your time zone. The clock will display the current time in your time
zone.
c) Press the Time Zone Button again.
d) To adjust the time for Daylight Saving time, slide the DST switch to +1 to advance the time 1 hour.
Slide to -1 to turn the clock back 1 hour.
To Set Clock Manually
a) Press and hold the Clock Adj Button located on the back of the unit. The clock display will flash.
b) Press the Up or Down Button until the current time is displayed (a PM indicator appears when time is set to
PM; there is no AM indicator).
c) Press the Clock Adj Button to accept the time. The year display will flash.
d) Press the Up or Down Button to adjust the year and press the Clock Adjust Button. The date display will flash.
e) Press the Up or Down Button to adjust the date and press the Clock Adjust Button. Two beeps will indicate
clock setting is complete. Use the DST switch to adjust for Daylight Saving Time.
Using the Alarms
Setting the Alarms
a) Press and hold the Alarm 1 Button until the alarm time flashes to wake to Bluetooth device or radio or the
Alarm 2 Button to wake to buzzer at a separate alarm time.
b) Press the Up or Down Button to set the alarm time (a PM indicator appears when time is set to PM; there
is no AM indicator).
c) To wake to radio, press the Mode Button to select your radio band, then press Up or Down Button to
tune to the desired station or press P1 to P4 for a preset station.
d) To wake to Bluetooth device, press the Play/Pause Button .
Note: Bluetooth device audio mode must be playing and Bluetooth device must be charging in order to wake to
Bluetooth device. Depending on the Bluetooth device you are using, iHC5 may not be able to make your Bluetooth
device play. If this occurs, the buzzer alarm will sound instead.
e) Press the Alarm 1 Button again (or the Alarm 2 button if you are setting second alarm). Alarm is now armed,
indicated by the numbered alarm clock icon (Alarm 1 for Bluetooth or radio and Alarm 2 for buzzer).
Reviewing, Arming and Disarming Alarms (Turn Alarm Function On and Off)
a) Press and Alarm 1 (or Alarm 2 ) Button once. The iHC5 will show the current alarm time for alarm time review.
b) Press the Alarm On/Off Button to arm or disarm the alarms. When an alarm is armed, the related alarm icon
appears in the display.
3
P6