Filter
Top Products
iDM8
Using the
4
Using Bluetooth: Pairing Your Device
P8
NOTE: See the iDM8 Bluetooth Connection Guide for complete pairing details.
1. Move the Lock/Aux/Bluetooth Switch to the Bluetooth position (right).
2. Turn on Bluetooth capability on your device and make it discoverable (see your device’s
instructions to add or setup a Bluetooth device).
3. To turn on the unit, press and hold the Power Button on the iDM8 until an amber light
flashes on front of the unit and it beeps twice to indicate auto-pairing attempt.
4. Press and hold the Play/Pause/Pairing Button. The amber light will flash while the unit
attempts to pair. On some devices, tap on the device name to begin pairing. If your device
asks for a password, enter 1234 on the keyboard of your device. If no device is paired
within 3 minutes, the unit will power off. If this occurs, retry steps 2-3.
5.
Once paired with a device, the amber light will glow steadily, then turn green. There
should be an indication on your device that pairing is complete. On some devices, you
must then select “Use as Audio Device (stereo)” or similar on the device’s Bluetooth menu.
Once paired, your device should link to the iDM8 whenever within range.