Filter
Top Products
5
Using Bluetooth: Pairing Your Device (cont’d)
iBT24
Using the
P9
Playing Audio Via Bluetooth
1. Move the Power ON/OFF Switch to the ON position (right) to listen to audio streamed
wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device.
The blue light will flash as the unit searches for a previously paired device, and then turn solid
blue once a previously paired device is detected.
2. Use the controls on your device to play or pause audio, navigate tracks and control volume
from your Bluetooth device.
3. When done listening, move the Power ON/OFF Switch to the OFF position (left) to turn the
unit off.
NOTE: Aux-in audio is disabled when Bluetooth audio is playing from a different device.
“iHome iBT24” should appear on your device’s menu. If “Not Paired”, “Not Connected” or
similar message appears, tap on “iHome iBT24“ to complete pairing. If your device asks for
a password, enter 1234 on the keyboard of your device. If no device is paired within 2
minutes, the unit will revert to auto link mode. To retry pairing, press and hold the Bluetooth
Pairing Button again.
NOTE: In any mode (auto link, pairing, Bluetooth or Aux audio) if the unit is connected to
charging source, the indicator light will be red instead of blue.