Filter
Top Products
Charging Your Headphones
The headphones come with a built-in rechargeable battery. Prior to using the headphones for
the first time, you are recommended to fully charge the battery.
Use only the supplied charger to charge the headphones.
● 3 hours are required to fully charge the headphones.
● Charging indication will be delayed for a few seconds if the headphones have not been used
for a long time or the battery is drained.
Pairing Your Headphones with a Bluetooth Mobile Phone
Pairing is only required the first time you use the headphones. Please refer to your mobile
phone user guide for pairing instructions.
1) Ensure the headphones are off.
2) To activate the pairing mode, press and hold the headphones’ MFB for 8 seconds without
releasing your finger until its status indicator flashes blue and red light alternately.
3) Activate your mobile phone’s Bluetooth, search Bluetooth devices, select “BlueBAND
Sport” and enter the password “8888”. When the pairing is completed, the headphones’
status indicator will flash blue light rapidly for five times.
If the pairing cannot be completed within 3 minutes after the pairing mode has been activated,
the headphones’ status indicator will flash purple rapidly for five times and then turns off.
Repeat steps 1 to 3 to pair both devices again.
Turning Your Headphones On and Off
● If your headphones are paired with your mobile phone, press the MFB once more
after you turned on the headphones to re-connect the mobile phone and
headphones.
● If you do not plan to use the headphones for a while, you are recommended to turn
off the
Bluetooth function of your mobile phone.
Using Your Headphones
Call Functions
a short beep
a short beep
Flashing purple light
Flashing blue light
Flashing blue light
Flashing blue light
Flashing blue light
Flashing blue light
Flashing blue light
Flashing blue light
Function Button Audio Status Indicator
Press the MFB once
Press the
MFB once
Press once
Double click
Press the
MFB once
Press and hold either volume key
for 2 seconds
While speaking, press and hold
either volume key for 2 seconds
While speaking, press
once
Answer a call
End a call
Adjust Volume
Voice Dialing
Last No. Redial
say the voice tag as soon as you hear the short beep and you must have recorded the voice
tag into your mobile phone
Call Waiting
Call Reject
Call Transfer
(headset to mobile phone)
Call Transfer (mobile phone
back to headset)
Press the Volume + / Volume
once to increase / decrease by 1
step (Total 8 levels)
• Charging
• Fully charged
• Low battery
• Out of battery
• Red light
• Blue light
• Flashing red light
• The light goes off
• a short beep every 1 minute
Status Indicator Audio
Status
Function
Turn on
Turn off
Press and hold the
MFB for 2 seconds
Press and hold the
MFB for 2 seconds
a short beep
a long beep
Flashing blue light for 3 times
Red light for 2 seconds and
then the light goes off
Button Audio Status Indicator
When you turn on your headphones for the first time, the headphones
automatically enter the pairing mode, i.e. the status indicator flashes blue and
red alternately. This allows you to immediately pair your headphones and mobile
phone. Please refer to “Pairing Your Headphones with a
Bluetooth Mobile Phone”.
6
7 8
5