Hughes & Kettner CF 200 Stereo Amplifier User Manual


 
TECHNICAL DATA
Output power per channel: 70W at 8 ohms,
1
OOW at 4 ohms
Input sensitivity:
1 V
eff
/0 cl bv
l
Stereo mode
-
6dBV
/
0.63 V
eff
l Bridge mode
)
dBV/! V eff
Input impedance:
50 kohms
IMPORTANT SAFETY INSTRUCTIONS!
BEFORE CONNECTING, READ INSTRUCTIONS
1.
2.
3
. .
4.
5.
6.
7.
8.
Y.
Read all of these instructions
Save these instructions for later
use
Follow
all
warnings
and instructions marked on the product
Do
not use this product
near
water
Do
not place this product on an unstable cart, stand or table. The product
may
fall. causing serious damage to the product.
Slots and
openings
in the cabinet and the back or bottom arc provided for
\
entilation
to ensure reliable operation
of
the product and to
protect
it from
overheating these openings must not be blocked or covered. This product should
not
be placed in a built-in installation unless proper ventilation is provided.
This product should be operated from the type of power source indicated on the
marking
label. If you are not sure of the type of power
available
consult
your
dealer or local power company.
‘I his product is equipped with a
3-wire
grounding type plug. a plug having a third
pin.
This plug will only tit into a grounding-type power outlet. This is a safety
feature. If you are
unable
to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet. Do not defeat the purpose of the
grounding
type plug.
Do
not allow
anything
to rest
on
the
power
cord.
Do
not
locate
this product
w
here persons will walk on the cord.