Hubbell 31.350 Stereo System User Manual


 
JPS-500-1M © 2000
Printed in U.S.A.
HUBBELL
50 Edwards Street
Madison, Ohio 44057
(440) 428-1161
Fax (440) 428-7635
4301 Cheyenne Drive
Archdale, NC 27263
(336) 434-2800
Fax (336) 434-2801
Hubbell Industrial
Controls, Inc.
a subsidiary of
Hubbell Incorporated
Hubbell Industrial Control Solutions
http://www.hubbell-icd.com/radiocontrols/
72 MHz Transmitters 450 MHz Transmitters
Frequency Range 72-76 MHz 406–430, 450–475 MHz
Channel Available per customer license per customer license
Frequency Stability -10 to 60° C ±5ppm ±5ppm
Emission Type 10KOFID 10KOFID
Spurious/Harmonic Output (below carrier) >70db >80db
Output to Antenna 300 mW 300 mW
(low) / 1 W (high)
Effective Radiated Power 150 mW 150 mW (low) / 500 mW (high)
Nominal Range (line of sight) 2000 ft* 2500 ft (low) / 3500 ft (high)*
FCC Identifier LRL922206-72 LRL922206-450
Canada Certificate Number 2259-203-224 2259-203-222
Voltage Requirement 120V ac or 250V dc 120V ac or 250V dc
Battery Usage no battery no battery
Recharge Time no battery no battery
Operating Temperature -22° F to 140°F -30° C to 60° C -22° F to 140°F -30° C to 60° C
Relative Humidity 20% to 90% non - condensing 20% to 90% non - condensing
LED Indicator Flashing: transmitting Flashing: transmitting
Function Lever Switches as required as required
Auxiliary Switches as required as required
Weight with Battery No Battery No Battery
* The use of “Whip Antennas”, raised 20 to 30 feet above ground level, on both transmitter
and receiver, increases the nominal range to 2 miles.
Transmitter Specifications
11.00
5.25
4.15
10.25
23.50
22.00
*
*
*
*
*
*
*
BRAKE
APPLY
RELEASE
E-STOP
RUN
R.F.
HOISTTROLLEY
BRIDGEMAGNET
HORN
XMIT
0.31 DIA.
8.00
22.75
UP
DOWN
NORTH
SOUTH
WEST
EASTLIFT
DROP