Hitachi CDR-8130 CD Player User Manual


 
4
IMPORTANT SAFEGUARDS
SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR EQUIPMENT
READ ALL INSTRUCTIONS.
SAVE THESE INSTRUCTIONS FOR LATER USE.
FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE PRODUCT.
PRECAUTIONS FOR SAFETY
Power source
-This CD-ROM Drive should be operated from the type of power source
indicated on the marked label. (+12V DC / +5V DC)
To avoid the risk of electric short circuits or damage to your CD-ROM drive
- Do not expose your CD-ROM Drive to rain or moisture.
- Do not open or remove the cover of your CD-ROM Drive.
It may cause personal injury by rapid rotating disc.
- Turn off your SYSTEM and unplug the power supply cable of your SYSTEM
from the wall outlet before installing your CD-ROM Drive, interface card or
connecting cables.
- Do not allow liquids and foreign objects to get in .
- Do not place heavy loads on the CD-ROM Drive.
- Do not use this CD-ROM Drive without mounting it.
- Firmly attach the DC power supply cable, connecting cables between the
CD-ROM Drive and other devices and keep them connected securely.
In case of failure
In case of the following conditions, turn off the SYSTEM including the CD-ROM
Drive and unplug the power supply cable of the SYSTEM from the wall outlet
immediately.
Do not attempt to service the CD-ROM Drive yourself and refer servicing to
qualified service personnel immediately.
- If objects of any kind have been entered into your CD-ROM Drive
- If liquid has been spilled into your CD-ROM Drive
- If your CD-ROM Drive has been exposed to rain or water
- If your CD-ROM Drive does not operate normally when the operating
instructions are followed
- If your CD-ROM Drive has been dropped or your CD-ROM Drive has been
damaged
- If your CD-ROM Drive exhibits a distinct change in performance
PRECAUTIONS FOR USE
Installation conditions
Do not install your CD-ROM Drive under the following conditions. It may lead to
trouble or affect performance by dust on the pick-up lens and the disc, by heat or
vibration.