Hasbro 88-308 CD Player User Manual


 
PRINTED IN CHINA
®, TM, & © 1999 Tiger Electronics, Ltd. All rights reserved.
980 Woodlands Parkway, Vernon Hills, Illinois 60061, U.S.A.
®, TM, & © 1999 Tiger Electronics UK Ltd. All rights reserved.
Belvedere House, Victoria Avenue,
Harrogate, North Yorkshire HG1 1EL, England.
www.tigertoys.com
12.RANDOM PLAY/SKIP AND SEARCH 
FUNCTIONS
RANDOM
This enables all the tracks on a disc to be played in a random (RAND)
sequence.
For example: if RAND is selected while playing track 8, the random
function will begin operating when track 8 has finished playing.
When all the tracks on the disc have been played in the random mode,
the CD player will automatically stop and power down in one minute to
conserve battery life.
To select RAND mode, push the MODE button four times during play.
Pressing MODE once more will return the unit to NORMAL play mode.
11.Intro Scan and Programmed Track Play
INTRO
To listen to the first 10 seconds of each song on the disc use the INTRO
feature. To initiate INTRO, press MODE button three times while the disc
is playing. If you wish to start the disc in INTRO mode, press MODE
button three times and then press
13.ELECTRONIC ANTI-SHOCK OPERATION
IThis player incorporates an electronic anti-shock circuit to help prevent
interruption of the sound output when the unit is subjected to shock or
vibration during disc playback. If in use the player is likely to be subjected
to shock or vibration (i.e. while walking or if used in a vehicle) press the
anti-shock button to provide uninterrupted playback.
When the anti-shock button is pressed in the play mode, the display will
show
and the function is initialized. When shows in the display, the
data buffer is full.
14.PLAYER MAINTENANCE
Cleaning the Cabinet
Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with
a weak solution of neutral detergent and water, then wipe clean.
Dust or Dry Particles
Using a camera lens brush / blower, blow on the lens a couple of times,
then wipe it lightly with the brush to remove dust. Then, blow on the
lens once more.
Fingerprints
If the lens cannot be cleaned using the brush / blowing method, use a
cotton swab starting in the middle and work to the outside edge.
15.DISC CLEANING AND 
TROUBLESHOOTING GUIDE
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc
from the center out.
PROGRAM
This allows selected tracks on the disc to by played in any desired order.
To set the program play
Note: Programs can be set in the STOP mode.
1. Press the PROGRAM button when
the unit is in the stop mode. The
track number will appear in the
display with the
indicator
flashing.
2. Press
or to select the
desired track.
3. Press the PROG button to enter
the track into memory.
4. Repeat steps 2 and 3 to program up
to 24 tracks into memory.
5. Press
to start the programmed play.
6. To erase the program, press the
STOP button twice.
Note: Do not use solvents such as benzene, thinner, commercially
available cleaners or anti-static spray intended for analog discs.
Should you experience difficulties in the use of this player, please refer
to the following chart or call 1- 888-844-7767 for customer service.
16.90-DAY LIMITED WARRANTY
Tiger Electronics, Ltd. (Tiger) warrants to the original consumer purchaser of
this product that the product will be free from defects in materials or
workmanship for 90 days from the date of original purchase. This warranty
does not cover damages resulting from accident, negligence, improper service
or use or other causes not arising out of defects in materials or workmanship.
During this 90-day warranty period, the product will either be repaired or
replaced (at Tiger’s option) without charge to the purchaser, when returned
with proof of the date of purchase to either the dealer or to Tiger.
Product returned to Tiger without proof of the date of purchase or after the
90-day warranty period has expired, but prior to one year from the original
date of purchase, will be repaired or replaced (at Tiger’s option) for a service
fee of U.S.$60.00. Payments must be by check or money order payable to
Tiger Electronics, Ltd.
The foregoing states the purchaser’s sole and exclusive remedy for any
breach of warranty with respect to the product.
All product returned must be shipped prepaid and insured for loss or damage
to:
Tiger Electronics, Ltd. Repair Dept.
980 Woodlands Parkway, 
Vernon Hills, Illinois 60061, U.S.A.
The product should be carefully packed in the original box or other packing
materials sufficient to avoid damage during shipment. Include a complete
written description of the defect, a check if product is beyond the 90-day
warranty period, and your printed name, address and telephone number.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND NO OTHER
REPRESENTATIONS OR CLAIMS OF ANY NATURE SHALL BE BINDING ON
OR OBLIGATE TIGER IN ANY WAY. ANY IMPLIED WARRANTIES APPLICABLE
TO THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE NINETY (90)
DAY PERIOD DESCRIBED ABOVE. IN NO EVENT WILL TIGER BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM POSSESSION, USE, OR MALFUNCTION OF THIS TIGER
PRODUCT.
Some states do not allow limitations as to how long an implied warranty lasts
and/or exclusions or limitations of incidental or consequential damages, so
the above limitations and/or exclusions of liability may not apply to you. This
warranty gives you specific rights, and you may also have other rights which
vary from state to state.
For more information about Tiger Electronics, our products and special
promotions, please visit our Web Site at: www.tigertoys.com
Locating a Particular Track
To return to the beginning of the current or a previous track, press the
lightly and repeatedly.
To move to the beginning of each subsequent track, press the
lightly
and repeatedly.
Locating a Particular Point in a track
To search backward at high speed, press and hold the
button.
To search forward at high speed, press and hold the
button.
Low level audio will be heard during the search process to assist in
locating the correct point in the track.
The sound will mute for approximately 1 second while the buffer fills.
Once filled the buffer will give approximately 10 seconds of protection
against interruption of sound output. If the player is subjected to shocks
of over 10 second duration some interruption of sound output will occur.
This is normal and to be expected and the sound will resume once the
player has stabilized from the shock.
To turn this function off, press the ANTI-SHOCK button again.
If you experience trouble with this equipment, please contact the following
address and phone number for information on obtaining service or repairs.
Company: Tiger Electronics, Ltd., Repair Dept.
Address: 980 Woodlands Parkway
Vernon Hills, IL 60061, U.S.A.
Tel. No. 847-913-8100
TROUBLESHOOTING GUIDE
PROBLEM THINGS TO CHECK
Player fails to function
Disc may be inserted upside down.
Disc not mounted correctly on chuck
Dirty or defective disc
Dirty pick up lens
Player lid is not closed properly
Moisture / condensation, slowly warm
player up to room temperature for 60
minutes
AC power to adaptor is switched off
Weak batteries
Auto power off has occurred, press
play button to restore power
No sound from Headphones
Headphone plug is not firmly inserted
into the green PHONES socket.
No sound when played
through an external amplifier
Connection is incorrect
Power to external amplifier not
switched on
Intermittent sound
Dirty or defective disc
Dirty pick up lens
Player is subject to excessive vibration
or shock
Low battery power
Poor Headphone connection
MODE
x 3 press
During play
Track no. of the first desired selection
The second selection
MODE
x 4 press
During play
Notes:
1. When using the ANTI-SHOCK function the battery power consumption
increases because the disc rotates faster than normal and the dynamic
memory is active.
2. While the ANTI-SHOCK function provides for continuous sound output
when the unit is subjected to shock or vibration, it will not correct
errors arising from the use of defective, scratched or dirty discs.
3. When powering the player solely from batteries, only use the ANTI-
SHOCK function where necessary to preserve battery life.
PROG
x 1 press
During STOP mode
© Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.
ASP Indicator
ASP Indicator
ASP Indicator