Harman-Kardon MS 150 Stereo System User Manual


 
11
MS 150
Technical Specifications
Specifications
System
Power output 30 watts per channel, 20Hz – 20kHz, THD
<0.07% into 6 ohms, both channels driven
Bandwidth 57Hz – 27kHz, –6dB
System frequency response 65Hz – 20kHz, ±3dB
Signal-to-noise ratio (“A” WTG) 75dB
Channel separation 60dB
Crosstalk between sources 60dB
Line-level input sensitivity at 1kHz 1.0V RMS, ±1dB
Video Outputs
Composite video 1.0V (pk-pk), 75 ohms, negative sync
S-Video (Y) 1.0V (pk-pk), 75 ohms, negative
sync
(C) 0.286V (pk-pk), 75 ohms
General
Power requirement DC 24V, 4.9A; 5V, 1A; power supply
works with AC 230V/50Hz
Power consumption <1W standby, 123W maximum
(both channels driven)
Operating temperature 0°C to 35°C (32°F to 95°F)
Dimensions (H x W x D) 252mm x 488mm x 194mm
(9-5/16" x 19-1/4" x 7-5/8")
Weight 8.2kg (18.08 lb)
Loudspeakers
Low-frequency transducers Two 125mm (4-15/16") felted-paper
drivers, ported
High-frequency transducers Two 19mm (3/4") titanium-laminate domes
Nominal impedance 6 ohms
Sensitivity (2.83V/1m) 87dB
Frequency response 80Hz – 20kHz (±3dB)
FM Tuner Section
Frequency range 87.5 – 108.0MHz
Usable sensitivity IHF 1.3µV/13.2dBf
Signal-to-noise ratio Mono/stereo 70/65dB
Distortion Mono/stereo 0.15/0.3%
Stereo separation 35dB @ 1kHz, 100% deviation @ 65dBf
Selectivity ±300kHz: 65dB
Image rejection 80dB
IF rejection 90dB
Tuner output level 1kHz, ±50kHz, Dev 500mV
Number of presets Six
RDS capability PTY (program type), PS (program service),
Text (radio text)
CD Section
Disc compatibility CD, CD-R, CD-RW, enhanced CD,
MP3, WMA
THD+N (20Hz – 20kHz) <0.01%
Frequency response 0dBr ±0.5
Channel separation 65dB
Signal-to-noise ratio (“A” WTG) >100dBr
22kHz filter >100dBr
Weight 9kg (19.8 lb)
Features, specifications and appearance are subject to change without notice.
Please register your product at www.harmankardon.com. You’ll need your product’s
serial number.