Harman-Kardon HK 3390 Stereo Receiver User Manual


 
14
CONNECTIONS
satellite television box, or MP3 player. Although the tuner is built into
the HK 3390, it also counts as a source, even though no external
connections are needed, other than the FM and AM antennas.
Separate connections are required for the audio and video portions
of the signal.
Analog Audio Connections
Analog audio connections require two cables, one for the left channel
(white) and one for the right channel (red). These two cables are often
attached to each other for most of their length. See Figure 4.
Figure 4 – Analog Audio
Video Connections
Although some sources only produce an audio signal (e.g., CD player,
tape deck), many sources output both audio and video signals (e.g.,
DVD player, cable television box, HDTV tuner, satellite box, VCR, DVR).
In addition to the audio connection, make a video connection for each
of these sources.
The composite video jack is usually color-coded yellow, and looks like an
analog audio jack, although it is important never to confuse the two. Do
not plug a composite video cable into an analog audio jack, and vice
versa. Both the chrominance (color) and luminance (intensity) components
of the video signal are transmitted using a single cable. See Figure 5.
Figure 5 – Composite Video
Antennas
The HK 3390 uses separate terminals for the included FM and AM
antennas that provide proper reception for the tuner.
The FM antenna uses a 75-ohm F-connector. See Figure 6.
Figure 6 – FM Antenna
The AM loop antenna needs to be assembled. Connect the two leads
to the spring terminals on the receiver. The AM antenna leads are
polarized, and it is important to color-match the leads and terminals
to maintain the proper polarity. See Figure 7.
Figure 7 – AM Antenna
Composite video
Composite
video cable
L
R
A
nalog audio
cable (RCA)
HK1695 3390OM 6/13/08 12:12 PM Page 14